World Beyblade Organization by Fighting Spirits Inc.

My reboot driver won't activate unless a bey hits it or i interfere.
no amount of launching can get it to activate normally.
is this normal

(Dec. 08, 2020  2:47 AM)Orochi\s Blade Wrote: [ -> ]My reboot driver won't activate unless a bey hits it or i interfere.
no amount of launching can get it to activate normally.
is this normal

No

Is there a fix?

(Dec. 08, 2020  2:49 AM)Orochi\s Blade Wrote: [ -> ]Is there a fix?

Maybe, but I dunno. My guess is that the stick that comes out is probably stuck or something is stuck in the driver. Maybe take the driver apart, clean it, clear it out and put it back together.

(Dec. 08, 2020  2:52 AM)TheRogueBlader Wrote: [ -> ]

(Dec. 08, 2020  2:49 AM)Orochi\s Blade Wrote: [ -> ]Is there a fix?

Maybe, but I dunno. My guess is that the stick that comes out is probably stuck or something is stuck in the driver. Maybe take the driver apart, clean it, clear it out and put it back together.

1: stick isn't stuck, it still functions, just not properly
2: How do i take a driver apart?

(Dec. 08, 2020  2:56 AM)Orochi\s Blade Wrote: [ -> ]

(Dec. 08, 2020  2:52 AM)TheRogueBlader Wrote: [ -> ]Maybe, but I dunno. My guess is that the stick that comes out is probably stuck or something is stuck in the driver. Maybe take the driver apart, clean it, clear it out and put it back together.

1: stick isn't stuck, it still functions, just not properly
2: How do i take a driver apart?

You use a small screwdriver, take the screws out, and boom.

(Dec. 08, 2020  2:58 AM)TheRogueBlader Wrote: [ -> ]

(Dec. 08, 2020  2:56 AM)Orochi\s Blade Wrote: [ -> ]1: stick isn't stuck, it still functions, just not properly
2: How do i take a driver apart?

You use a small screwdriver, take the screws out, and boom.

my driver screws are flat/have no indention

OROCHI USED BUMP

i still need help

(Dec. 08, 2020  2:58 AM)TheRogueBlader Wrote: [ -> ]

(Dec. 08, 2020  2:56 AM)Orochi\s Blade Wrote: [ -> ]1: stick isn't stuck, it still functions, just not properly
2: How do i take a driver apart?

You use a small screwdriver, take the screws out, and boom.

Real burst drivers don’t have screws, they have rivets. Except for Hybrid and Ignition’ so the batteries can be changed.

---

(Dec. 08, 2020  2:47 AM)Orochi\s Blade Wrote: [ -> ]My reboot driver won't activate unless a bey hits it or i interfere.
no amount of launching can get it to activate normally.
is this normal

You can try launching on a flat surface to see if you can see the stick or not, especially if it’s not ultimate reboot it’s not the biggest speed increase.

(Dec. 08, 2020  4:26 PM)Orochi's Blade Wrote: [ -> ]OROCHI USED BUMP

i still need help

Can you still pull the thingys? If so, it’s normal. After a few months or years, the driver gets stuck. My old friend had that problem.

(Dec. 08, 2020  5:30 PM)NamanSpryzen Wrote: [ -> ]

(Dec. 08, 2020  4:26 PM)Orochi\s Blade Wrote: [ -> ]OROCHI USED BUMP

i still need help

Can you still pull the thingys? If so, it’s normal. After a few months or years, the driver gets stuck. My old friend had that problem.

yeah i can pull them out and they still spring back

---

(Dec. 08, 2020  5:08 PM)Lugiamaster0249 Wrote: [ -> ]

(Dec. 08, 2020  2:58 AM)TheRogueBlader Wrote: [ -> ]You use a small screwdriver, take the screws out, and boom.

Real burst drivers don’t have screws, they have rivets. Except for Hybrid and Ignition’ so the batteries can be changed.

---

(Dec. 08, 2020  2:47 AM)Orochi\s Blade Wrote: [ -> ]My reboot driver won't activate unless a bey hits it or i interfere.
no amount of launching can get it to activate normally.
is this normal

You can try launching on a flat surface to see if you can see the stick or not, especially if it’s not ultimate reboot it’s not the biggest speed increase.

yes, i can see the white stick come out

(Dec. 08, 2020  5:41 PM)Orochi\s Blade Wrote: [ -> ]

(Dec. 08, 2020  5:30 PM)NamanSpryzen Wrote: [ -> ]Can you still pull the thingys? If so, it’s normal. After a few months or years, the driver gets stuck. My old friend had that problem.

yeah i can pull them out and they still spring back

---

(Dec. 08, 2020  5:08 PM)Lugiamaster0249 Wrote: [ -> ]Real burst drivers don’t have screws, they have rivets. Except for Hybrid and Ignition’ so the batteries can be changed.

---

You can try launching on a flat surface to see if you can see the stick or not, especially if it’s not ultimate reboot it’s not the biggest speed increase.

yes, i can see the white stick come out

If you launch it on its own and let it spin will it activate? After spinning and you pick it up is the stick in or out? Is it reboot or ultimate reboot? Fake or Real, if it’s real hasbro or TT? Is there anything that could be blocking it, like a chipped off piece of a Bey or a sticker stuck in it? Some of these questions might help, you can also post pictures of the driver.

Try spraying one of those compressed air dusters into the tip. There may be something blocking the way.

(Dec. 08, 2020  11:01 PM)Lugiamaster0249 Wrote: [ -> ]

(Dec. 08, 2020  5:41 PM)Orochi\s Blade Wrote: [ -> ]yeah i can pull them out and they still spring back

---

yes, i can see the white stick come out

If you launch it on its own and let it spin will it activate? After spinning and you pick it up is the stick in or out? Is it reboot or ultimate reboot? Fake or Real, if it’s real hasbro or TT? Is there anything that could be blocking it, like a chipped off piece of a Bey or a sticker stuck in it? Some of these questions might help, you can also post pictures of the driver.

no, in, reboot, Real; Hasbro, No.

You could try lubricating the gears inside (you need a really small nozzle) I did that and my reboot driver worked fine after that

(Dec. 13, 2020  4:38 AM)Orochi\s Blade Wrote: [ -> ]

(Dec. 08, 2020  11:01 PM)Lugiamaster0249 Wrote: [ -> ]If you launch it on its own and let it spin will it activate? After spinning and you pick it up is the stick in or out? Is it reboot or ultimate reboot? Fake or Real, if it’s real hasbro or TT? Is there anything that could be blocking it, like a chipped off piece of a Bey or a sticker stuck in it? Some of these questions might help, you can also post pictures of the driver.

no, in, reboot, Real; Hasbro, No.

So you can see the stick, but when you pick it up it’s rebooted? It sounds like it works, rebooting isn’t always a very big speed increase.

Just buy a new one I have a ultimate reboot mint condition

(Dec. 13, 2020  2:43 PM)Lugiamaster0249 Wrote: [ -> ]

(Dec. 13, 2020  4:38 AM)Orochi\s Blade Wrote: [ -> ]no, in, reboot, Real; Hasbro, No.

So you can see the stick, but when you pick it up it’s rebooted? It sounds like it works, rebooting isn’t always a very big speed increase.

>So you can see the stick, but when you pick it up it’s rebooted? 
Yes, but nothing happens when it spins by itself

(Dec. 13, 2020  8:23 PM)Orochi\s Blade Wrote: [ -> ]

(Dec. 13, 2020  2:43 PM)Lugiamaster0249 Wrote: [ -> ]So you can see the stick, but when you pick it up it’s rebooted? It sounds like it works, rebooting isn’t always a very big speed increase.

>So you can see the stick, but when you pick it up it’s rebooted? 
Yes, but nothing happens when it spins by itself

But then does it really matter? As long as it will reboot in a battle you should be fine?

(Dec. 13, 2020  8:25 PM)Lugiamaster0249 Wrote: [ -> ]

(Dec. 13, 2020  8:23 PM)Orochi\s Blade Wrote: [ -> ]>So you can see the stick, but when you pick it up it’s rebooted? 
Yes, but nothing happens when it spins by itself

But then does it really matter? As long as it will reboot in a battle you should be fine?

I just thought it was weird. Thanks!

I have the same issue with my Hasbro reboot from the ultimate set

its a mold one variation they do that

(Dec. 29, 2020  9:08 AM)your golden boy Wrote: [ -> ]its a mold one variation they do that

Problem solved!

ok good how'd you do it

Now we know it's normal, the way to fix it is to oil your components lol that's what always do