World Beyblade Organization by Fighting Spirits Inc.

(Sep. 03, 2018  9:31 AM)IronFace879 Wrote: [ -> ]

(Sep. 03, 2018  7:48 AM)ClearWing R34 Wrote: [ -> ]Do you know the Australian price bc if it over $25 I'm screwed

Every SwitchStrike Starter pack was $25AUD

I think it’s safe to say you’re screwed.

At the moment, unless Hasbro becomes nice enough to turn it into $25AUD again and not $30AUD.

How were the regular Starter Packs in Australia?

(Sep. 03, 2018  4:30 PM)BeyCrafter Wrote: [ -> ]

(Sep. 03, 2018  9:31 AM)IronFace879 Wrote: [ -> ]Every SwitchStrike Starter pack was $25AUD

I think it’s safe to say you’re screwed.

At the moment, unless Hasbro becomes nice enough to turn it into $25AUD again and not $30AUD.

How were the regular Starter Packs in Australia?

They were all $20AUD here. Looks kinda fine here. It is just 1.4 difference between US and AUS.

(Sep. 03, 2018  4:30 PM)BeyCrafter Wrote: [ -> ]

(Sep. 03, 2018  9:31 AM)IronFace879 Wrote: [ -> ]Every SwitchStrike Starter pack was $25AUD

I think it’s safe to say you’re screwed.

At the moment, unless Hasbro becomes nice enough to turn it into $25AUD again and not $30AUD.

How were the regular Starter Packs in Australia?

dual layers they are $17 au

Well if that's the price of the regular Starter Packs, then you should have nothing to worry about since the Turbo starter packs are supposed to be $10 USD.

I have a few more images about the SlingShock Drivers, this time, it's the modified versions of Wedge and Liner.
First up is Wedge-S, which seems a bit different from the physical product though it's very similar. Unlike Fusion-S and Needle-S, the tip retracts in this case instead of something being pushed over it. Also differing from the two SlingShock Drivers I previously showed is the use of a latch instead of twisting. This comes on Roktavor R4 and Spiral Treptune T4.

Next up is Liner-S, which comes on Galaxy Zeutron Z4. It's a bit odd, but I guess it's hard to SlingShockify Planet or it's just too pricey for them. The mechanism on this Driver is identical to Fusion-S, though I am concerned about it being fragile since it's not a fully circular tip from what I'm seeing and would need two slits on either side to allow for the wheel to spin.

This is what I have for now, enjoy. :)

Thanks for the new images.

But as I thought, they had Liner, I guess old habits never die, which is too bad but the idea of it's transformation is interesting I suppose. What's next though? Slingshock Edge? I see a + shaped hole flat tip where the Edge tip can stick out or retract from.

Thanks! Where did you get this information from though? Lemar Devante's Youtube channel?

I FINALLY DID IT... A HASBRO EXTREME'

(Sep. 03, 2018  1:18 AM)Kevo Wrote: [ -> ]I found high res (watermark free) images of the new turbo stuff: https://imgur.com/a/7jGcvjt

Source: https://creativewholesaleonline.com.au/c...urst+turbo

Unless they did a really good paintjob (which I doubt), it appears hasbro Cho-Z layers have no metal on them. That'll be a pretty big revelation if it's true. We might have another Metal Fight 4D scenario going on here.

Edit: These two pictures in specific are the ones that have me worried.
 

It was already confirmed on page 144 of this thread that there is definitely metal on the Cho-Z layers.

(Sep. 04, 2018  11:32 AM)Laban Vanot Wrote: [ -> ]It was already confirmed on page 144 of this thread that there is definitely metal on the Cho-Z layers.

it was not confirmed, it was said they most likely have it. Most Likely =/= Definitely

(Sep. 04, 2018  7:40 AM)ToxicAtom Wrote: [ -> ]Unless they did a really good paintjob (which I doubt), it appears hasbro Cho-Z layers have no metal on them. That'll be a pretty big revelation if it's true. We might have another Metal Fight 4D scenario going on here.

Edit: These two pictures in specific are the ones that have me worried.

Then this should shed some light
[Image: BansbG3.jpg]

(Sep. 04, 2018  4:54 PM)BeyCrafter Wrote: [ -> ]

(Sep. 04, 2018  7:40 AM)ToxicAtom Wrote: [ -> ]Unless they did a really good paintjob (which I doubt), it appears hasbro Cho-Z layers have no metal on them. That'll be a pretty big revelation if it's true. We might have another Metal Fight 4D scenario going on here.

Edit: These two pictures in specific are the ones that have me worried.

Then this should shed some light
[Image: BansbG3.jpg]

Every time I look at the Hasbro's Layer colour ( I think it is the BEST ) and every time I look at the Hasbro's Driver ( I think it is a GARBAGE ) !!!!

Honestly, I think it's cool they're taking some risks to differentiate themselves from TT. I don't see what the complaint is. The layers look great and the Performance Tips have multiple functions. We don't know how good they'll be, but I, for one, am happy Hasbro and TT are doing different things.

Also, the stadium looks large! Hoping the gimmick works well, too.

just imagine...Operate with 4 modes...

(Sep. 05, 2018  12:09 AM)Grey Bey Wrote: [ -> ]just imagine...Operate with 4 modes...

I personally see three modes for Operate-S, unless they use the twist lock versus the lever. Even then I could still see three modes.

I've been seeing tidbits online of the quad ring set, the pro tournament set, and some new slingshot set that seems to come with hasbro versions of winning valkyrie and zet Achilles. 

I'm looking for any relevant information about release dates in the USA and availability.

Ive heard rumors that the quad ring set is already on shelves in Australia. Since I can't find any info online I figured I see if anyone here knew anything. 

Thanks.

(Sep. 05, 2018  7:33 PM)Dutchems Wrote: [ -> ]I've been seeing tidbits online of the quad ring set, the pro tournament set, and some new slingshot set that seems to come with hasbro versions of winning valkyrie and zet Achilles. 

I'm looking for any relevant information about release dates in the USA and availability.

Ive heard rumors that the quad ring set is already on shelves in Australia. Since I can't find any info online I figured I see if anyone here knew anything. 

Thanks.

According to my calculations, the Turbo line should be in stores around November or December of this year, most likely starting in Canada or Australia.

I'm just starting to see toywiz ads with way too high prices for new stuff I've never seen. I can't wait til they pop up in stores.

The Walmart near me used to have only a spot on the shelf for beyblade stuff now they have a huge cardboard pillar filled with it. Maybe it's gaining popularity in the states?

The quad ring set is real. It comes with 4 rings, Roktavor R3 and a Cognite C3. Slingshot set I cant confirm, I have not heard much about it. The pro tournament set is rumored to be used in kidexpo at Paris for the Beyblade Burst World Tour by Hasbro. Judged on my predictions, confirming what CitrusNinja3 said, it should release in November or December. Maybe even earlier because usually they release it akin to the English counter part of the anime on Disney XD. They released some bey's early for reason's which I'm not completely aware of. An examples of this is Luinor L3.

Someone actually found Balkesh B3 and Khalzar K3 in their stores, that's awesome. Spread the word!

I was the one that found K3 and B3, you can see the unboxing of B3 on my channel: https://www.youtube.com/channel/UCtZlxsr...IF73w?view=

(Sep. 06, 2018  8:38 PM)BEYBLADE BEN Wrote: [ -> ]I was the one that found K3 and B3, you can see the unboxing of B3 on my channel: https://www.youtube.com/channel/UCtZlxsr...IF73w?view=

so,what do you think about B3's performance?

I was looking on toy wiz and I found something that is coming in the future and it’s called the precision strike launcher I wonder what it’s gonna look like.

(Sep. 06, 2018  9:54 PM)ironspider2357 Wrote: [ -> ]I was looking on toy wiz and I found something that is coming in the future and it’s called the precision strike launcher I wonder what it’s gonna look like.

That was found with the Mexican Amazon leak. We don't know what it technically is yet, but my theory is a launcher that's similar to the Supergrip in that it's a launcher with a grip.