World Beyblade Organization by Fighting Spirits Inc.

Full Version: B-128 Beyblade Burst Cho-Z Customize Set
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Orb Egis is the weirdest bey in any beyblade series to be honest.
Oh my god. Qs is such a joke. It'll be fun to mess with though ? They clearly just made this driver to look cool in the show.
Seems like Qs is a Bearing driver fused with a suction cup. O.0 Very very interesting. Grin
As stupid as Qs is, I can see it getting banned when used with spin stealers. They'd never fall down
The black part is on the layer, the frame seems to be grey, and the white parts where the launcher fits in is separate from the layer witch means that yes there will be dual rotation.
Qs might be really good against opposite spin but right now I'm really disappointed in the ser
[video=youtube]https://youtu.be/4AMY_Z23G5k [/video]it's crasy leak today :P
is Orb Egis the tallest burst bey?
[video=youtube]https://www.youtube.com/watch?v=6Od9x0Yi4rA [/video]

The original video
(Oct. 14, 2018  6:53 PM)BurstMaster Wrote: [ -> ]The black part is on the layer, the frame seems to be grey, and the white parts where the launcher fits in is separate from the layer witch means that yes there will be dual rotation.

yeah,we know that,the video posted in this thread shows it switching spin directions.

(Oct. 14, 2018  6:22 PM)Jinbee Wrote: [ -> ]https://mobile.twitter.com/luyluy6821/st...8816459776

Looking at this Twitter post, I'm wondering if closing or opening certain modes of the layer will block the launcher from the slots or not. Likely not though, but I thought this might be worth addressing nonetheless.

maybe the "mode changing" is not supposed to be manual? because in the video posted before,when he shows the backside of Spriggan,it has four springs. Maybe when it clicks,the disc pushes that little tab so the black spikes move
(Oct. 14, 2018  7:34 PM)Grey Bey Wrote: [ -> ]
(Oct. 14, 2018  6:53 PM)BurstMaster Wrote: [ -> ]The black part is on the layer, the frame seems to be grey, and the white parts where the launcher fits in is separate from the layer witch means that yes there will be dual rotation.

yeah,we know that,the video posted in this thread shows it switching spin directions.

(Oct. 14, 2018  6:22 PM)Jinbee Wrote: [ -> ]https://mobile.twitter.com/luyluy6821/st...8816459776

Looking at this Twitter post, I'm wondering if closing or opening certain modes of the layer will block the launcher from the slots or not. Likely not though, but I thought this might be worth addressing nonetheless.

maybe the "mode changing" is not supposed to be manual? because in the video posted before,when he shows the backside of Spriggan,it has four springs. Maybe when it clicks,the disc pushes that little tab so the black spikes move

I posted that before I knew there was a video on it

Geist Fafnir 4G Qs

Check up on your favorite auction sites regularly. If these supply chain leaks are actually happening then we could see these beys going up on them.
So my opinions:

Spriggan: looks interesting. The layer seems to be something to look forward too. Nice additions are the 0 disk. Disappointed by the Zeta' driver, but who isn't? The frame also concerns me, as it doesn't seem to be good for anything in particular, and even then the thickness may just be vines given off by the shape of the frame, so it could be lightweight?

Egis: looks amazing. That Outer disk is thankfully not painted, which may sound weird, but I personally did not want to end up scraping a disk as good as that. The new driver seems very, and I mean, VERY odd. I'm not sure what it is supposed to do, but it looks like a suction cup and a weird spinning segment like Eternal Defense from MFB. Combined with its height, I'm very unimpressed so far.

As for cR, I'm glad I can finally get it and cross without needing RBV10 or bR, but I somehow missed that it would have Volcanic'. I'm interested in having that layer though, as it looks very nice.
Qs is definitely an ... ummm... interesting driver. Hey though, I was right! It was a free spinning rubber tip!
What's so special about the new Volcanic except it having a bit of red on it?
i might have a theory of why they put outer on orb egis
the qs driver is meant to combine grip defense and stamina but it only has defense so they put outer on the combo so it would have more stamina since outer shows incredible stamina
We were considering that the description of Turn-E, that special material which had never been used is applied on this bey to realize defense in another way, is for the Layer Orb Egis, but know it seems that what that described is actually the Driver Qs.
(Oct. 14, 2018  9:29 PM)BounduAtakku Wrote: [ -> ]What's so special about the new Volcanic except it having a bit of red on it?

It has a golden spring, increasing burst resistance significantly, thus being called Volcanic' rather than Volcanic.
(Oct. 14, 2018  10:14 PM)CrazyAries Wrote: [ -> ]We were considering that the description of Turn-E, that special material which had never been used is applied on this bey to realize defense in another way, is for the Layer Orb Egis, but know it seems that what that described is actually the Driver Qs.

Good observation! It's probably why it was described as "immovable" or something along those lines. The suction tip stays in position pretty well.
Well,It’s that time again. Time for more of “BSP’s Biased Reviews/Theories”.
Starting off with the most hyped one, Cho-Z spriggan. (I am not sure if that is the real name yet, but personally, i think it looks like it should be called “Divine Spriggan”). 
The layer looks Like a beautiful fusion of legend spriggan and storm spriggan. Plus, those teeth look amazing! 
The disc, same old zero. It’s a good disc, but...boring. 
The new frame on the other hand, “w”, looks cool. If i had a guess for the frame’s real name, i’d say “Wall”. It’s shape kinda reminds me of an upside-down arc bahamut/alta cronos, As well as the plastic part of hS. It looks like it wouldbe good for defence, but it also looks very...lightweight.
Lastly, zeta Dash. I like it. I don’t get why people are mad that they didn’t change the tips, cause none of the other (driver)’-es had their material changed, only the spring.
All in all, seems REALLY good.
I’ll “review” orb egis tomorrow.
(Oct. 14, 2018  10:14 PM)CrazyAries Wrote: [ -> ]We were considering that the description of Turn-E, that special material which had never been used is applied on this bey to realize defense in another way, is for the Layer Orb Egis, but know it seems that what that described is actually the Driver Qs.
Do you know what the suction cup is made out of?
(Oct. 14, 2018  2:21 PM)I’m CitrusNinja3 Wrote: [ -> ]
(Oct. 14, 2018  4:28 AM)Zeutron Wrote: [ -> ]My opinion on this set:

Outer Weight Distribution and OWD are the same thing, no need to state it twice in the same sentence...

I know, sorry my bad I will go and fix it I did intend to have both there but I forgot a comma.
My idea to this set:
bL.1'D.Cy: This is okay, although this combo itself is horrible that in my test, it even lose to bL's stock combo in spin finish. The black bL and purple Dagger look awesome. 1' is not so aggressive as 1, and Cy is basically useless.
cR.5C.Vl': Disc 5 is not competitive now and I don't like its design. But I like Frame Cross very much. What disappointed me is that we had not get another Cross for very long time after RB7. Vocanic is also one of my favorite attack driver. It's hard to control but is very powerful, So I wonder how it would work with an improved spring.
oE.Ω.Qs: This is my favorite in this set. First, oE is very competitive, no matter in the case of attack, defense or stamina. Ω is the best stamina Disc so far and it was really hard to get, which somehow break the balance of meta. And Qs, this is really interesting. Although it may not be competitive in tournaments, but I think this is what a DEFENSE driver should be, that have almost unlimited KO resistance while have basically no stamina. And by the way, I have made a driver called Quall, which has a free-spin large rubber ball tip, and I think it has some similarity with this Qs Driver.
Cho-Z S.0W.Zt': 0 is good, Zt' is useless although it has a strong spring. The layer looks great, and what I like the most is that this Spriggan can not only switch its direction, but can also extend some small blades to change its mode. It has not rubber so we don't need to worry too much about the OP problem like Sr. Frame W is okay, but it seems to be too thick so that it would easily scratch the stadium and stop quickly, but I think this could be solved by the drivers with good LAD abilities like Xt+ or Bearing.
Oh right, yeah I should also give my detailed thoughts on the set, rather than scatter them around:

Crash Ragnaruk .5C.VL' - This one is kinda meh for me honestly, even with some kind of cool recolours of Cross and cR, the parts are mostly uninteresting. Crash Ragnaruk is alright, it looks cool in white and it's great that the layer is accessible to those who didn't get the prize from RBV10... but seeing as I did recently, I'm going to consider this a bust. 5 is alright, it has okay stamina. I was never into it's design, it never quite got the odd number disk look correct like 7 did. Cross is fine, it has a nice green recolour and it's hardly been released recently so it's nice for it to make a comeback, though it is kind of odd how this frame is older than the other extra beyblades frames we got in the God Customise set, Star and Meteor. Vl' is bleh, not only was I really not into the original Volcanic to begin with and adding a stronger spring, in this case, while beneficial doesn't exactly make me want it more.
Bloody Longinus .1'D.Cy - This one has a similar problem to Crash Ragnaruk where it lacks interesting parts while not suffering from it's okay but not great recolour, this on the other hand looks fantastic! I love the purple and black aesthetics and part of me wishes this was it's stock colours. 1' is kind of cool, not the best and I would rather another core disk but I like 1' okay, though I don't know how useful it is. A purple Dagger looks nice, though I'm not too huge on Dagger honestly, but it looks pretty cool. Cycle is okay, but I would rather get it for Jail Jormungand just to make Sasha's combo in the anime, as this one has a greener tint. Other than that, Cycle isn't that useful nor one of my favourites.
Orb Egis .Ω.Qs - This might be my favourite of the set, but I'm still deciding between this and Spriggan. I really love the layer recolour, though I can hardly tell the difference from it's RLC recolour, I know which part got recoloured but you know what I mean. Nonetheless it's really cool. I was really shocked that they included Outer, but hey, an easier way of getting Outer is okay for me, and it's unpainted so I won't have to worry about ruining it. Outer is great for stamina too so there's that. Qs though, this is by far the oddest, my interesting, quite possibly the worst driver competitively (presumably), AND I LOVE IT! The idea of using suction to latch onto the stadium for defense sounds very cool and I'll give them an A for effort. I love myself some odd unique drivers and this is right up my alley.
Cho Z Spriggan .0W.Zt' - This or Orb Egis are my favourite of the set, and for obvious reasons as they are the focus of the set. The layer looks fantastic, it looks a little better than the beautiful lS and completely curbs Sr in terms of aesthetics, the colour scheme is great, and I appreciate the shape being more aggressive, hopefully it won't be as ridiculously good as Sr was, unless it was attack. 0 is cool and my favourite disk, but to be honest this is pretty disappointing considering this is an upgrade to Spriggan. Fafnir, Longinus and Valkyrie got new disks so... why not this? The W frame looks pretty cool, it's nice and bulky but what is it meant to do? I mean thinking of this in a sense that it is meant to be a balance type frame. It looks like it'll scrape easily too. Zt' was easily the most disappointing choice, while Zt is pretty cool albeit useless, this wasn't exactly what I had in mind for an upgrade for Spriggan. Besides a tighter spring, it's hardly an upgrade, and it is pretty much just using Sr stock parts, 0 and Zt. The spring being tighter won't even be that useful for it's tips, but at the same time, tighter springs should never be used for stamina and defense tips, in my honest opinion.

Anyway, this is my thoughts on this set. A pretty solid set overall and I will definitely get it for the two main focuses.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24