Probably my last Sparking bey ever (probably...)
Scorcher Kitsune αnchor' 2A
Ring: Scorcher (Sc) - A Right Spin ring kinda looks like Brave but the blades are closed and not poking outward and it still has rubber. Plastic is red and the rubber is opaque Yellow
Chip: Kitsune (Kt) - a Red right spin sparking chip with a Kitsune motif, a fox spirit. The fox on the chip is painted gold and has blue eyes. The chip has a gold sun core
Chassis: 2A
Driver: αnchor' (αn')
User: Kyla Horubichi
my first beyblade idea is as shown
layer (fatal Phaethon): spins left, the blades extend like chains or whips as it spins to do a wide range of attack and defense. the color is yellow
disk (blitz): used on hasbro's version of sword valtryek
driver (upper claw): gives extra stamina and helps with the chains on the layer. the color is red
My first of probably many beyblades..
Layer (AE-Dash): Right spinning, 2 metal blades attached to the main metal frame, several small spikes and rubber on the bottom-side to deflect lower attacks, colored red, except the blades are blue, focused on attacks and defense
Disk (Carnage-Fusion): similar to a fusion wheel with 16 toothed disk that connects similar to the bust beyblades, focuses on attack, colored blue with one gold tooth
Driver (Balancer): a rubber tipped stamina driver with an internal gyroscope for balance and leveling, metal frame covered in plastic except a circular ring that protrudes out about half way up the driver
I actually have Two beys that I made quite a while back, I'm remaking them now.
Decay Colossus Wheel Metal Xtreme
Decay Colossus: a part with a Similar gimmick to Revive and Dead Phoenix, the Decay Armor has four distinct points, all containing Metal. When it's knocked off, it can be ricocheted directly into the opponent's Driver. It can be flipped, Akin to the Master Base and World Ring.
Wheel: Wheel, same disc from Glide Ragnaruk
Metal Xtreme: Xtreme' level rubber but with metal cap
Shattered Regal 00 (Gold painted) Proof Orbit Metal'
Shattered Regal: The counterpart to Decay Colossus, sharing most of the same features. The only difference between the two is that the Shattered Armor cannot be flipped on the Regal core, and that it spins counterclockwise, unlike Colossus. The armor consists of a similar design to Decay, but it has the ability to detach the Metal, allowing the configuration to change. 4 pieces are removable, allowing mode changes. 2 in each side puts it in Balance Mode, while 3 on one side with 1 on the opposite side makes it enter Counter Mode. When the armor is detached, it can ricochet off the stadium wall to obstruct the path of the enemy.
00: You've seen it before, the only difference is that it's gold this time
Proof: a nice Solid White Proof frame, with some sparkles added here and there.
Orbit Metal': Orbit Metal but dash spring (running out of ideas that could actually be practical)
My Beyblade comes from the "Cho-Z" generation with a part form the "GT" generation
The name: Destruction Diablo
The Energy Layer: Red removable Armor, with a Black Center, with an Upside-Down "V" at the bottom, in the color of crimson red, and 2 "eyes" from angled "D"'s, also Crimson red.
Forge Disc: 13 Vortex
Driver: Bullet
The Armor, half of the tip, and the "vortex" can come off, mimicking the "Dread Cannon Crush" ability, my "clones" go to 3 sides of the Opponent's bey, pressing down on it, and my "base" goes to the "open" side, causing the opponent's bey to either burst or be overloaded and shattering.
NOTE: I will only use my "Devastating Destruction Diablo Cannon Crush Catastrophe" on Bladers who have destroyed other Beys
hell salamander mixed with dread phoenix
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: [ -> ]This is for post-contest ideas for beyblade burst. Feel free to share your ideas here :)
Format:
Layer (insert name here): Describe part here
Disk (insert name here): Describe part here
Driver (insert name here): Describe part here
EXAMPLE:
Layer (dragon): relatively circular, but blades cover the edge like scales, except where the head is, which is at the top of the beyblade. The clear plastic is tinted metallic crimson, and the inner plastic is white.
Disk (spread): released on spriggan, spread is a disk with the most even weight distribution.
Driver (grip): It's a hole rubber flat. It is a strong part because it has a hole in an attempt to preserve some stamina, while the rubber emphasizes attack and defense. The driver is pearl white, and the rubber is red.
DB Core: Spriggan. Adds weight to the ring.
Blade: Empire. A round shape design and has dual spin like world.
Disc: Nx or (Nexus) Adds attack and defense weight to the bey for more resistence.
Driver: Zt or (Zeta) Has 3 modes attack, stamina, and defense.
Armor:7 adds balance to the core and ring.
Empire Spriggan. Nx. Zt-7
Send me a message if you like mine?
Moves: Counter Break, Empire Slash, Empire Spin, Counter Dive, and Ultimate Diving Counter Empire Slashing Dive.
Winter Monoceros Vex 1A/Star Monoceros Comet Vex'-2
Ring: Winter (Wn) - a ring that looks kinda like Ace but the blades are completely filled with metal and lined with Rubber.
Chip: Monoceros (Mn) a right spin sparking chip with a Monoceros motif, a horned beast kinda like a unicorn. it has a blue, purple and black color scheme with a purple chip core
Chassis: 1A (Purple)
Driver: Vex (Vx) - a driver that has a wide base with a rubber ring surrounding a shaft with a hole flat
Blade: Star (S) - same thing as above but as a Blade
Core: Monoceros (MN) - A Core with the same motif and colors
Armor: -2
Disk: Comet (Cm) a disk that works with Low Mode, the disk has 2 points with 2 blades that point left
Driver: Vex' (See Above)
User: Mikuri Fujihara
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: [ -> ]Energy Layer (sorta valtryek style): really jagged, blades are more circular, has 4 blades. Blades are mostly to bounce off of opponent (the rubber) and heavy attack. The rubber is black and the rest is white.
Ring (sharp blades) Zex/Zx: It digs into a bey getting it ready for a heavy attack.
Driver (fending off): there are blades in the middle of the driver, this helps it fend off on attacks. When fending off, it grabs the power and uses it to make the bey faster. Then the driver is no longer used for fending off but for heavy attacks. The driver is white.
Chip (tilted stabilizer): It does have a level chip but the normal chip actually helps it stabilize when it tilts a lot. The chip is dark red.
I made the most of white because in MY opinion, it went with the colors.
Its name is: Hidden Zelph.
Click this link to check it out:https://www.tinkercad.com/things/910pabapNX2-hidden-zelph
Energy Layer (sorta valtryek style): really jagged, blades are more circular, has 4 blades. Blades are mostly to bounce off of opponent (the rubber) and heavy attack. The rubber is black and the rest is white.
Ring (sharp blades) Zex/Zx: It digs into a bey getting it ready for a heavy attack.
Driver (fending off): there are blades in the middle of the driver, this helps it fend off on attacks. When fending off, it grabs the power and uses it to make the bey faster. Then the driver is no longer used for fending off but for heavy attacks. The driver is white.
Chip (tilted stabilizer): It does have a level chip but the normal chip actually helps it stabilize when it tilts a lot. The chip is dark red.
I made the most of white because in MY opinion, it went with the colors.
Its name is: Hidden Zelph.
Click this link to check it out:https://www.tinkercad.com/things/910pabapNX2-hidden-zelph
Layer: Scythe Griffin ( attack type , Griffin in the centre , two big blades , burst stoppers , sparking Beyblade)
Disk: Infinite ( Infinite loop design)
Driver: Accelerate ( accelerates after 10 seconds in the stadium)
is this good?
(Jul. 02, 2021 9:00 AM)MasterBlader77 Wrote: [ -> ]Layer: Scythe Griffin ( attack type , Griffin in the centre , two big blades , burst stoppers , sparking Beyblade)
Disk: Infinite ( Infinite loop design)
Driver: Accelerate ( accelerates after 10 seconds in the stadium)
is this good?
Has a bit too little details. Since this is a Sparking Bey, what Chassis does it use? Given your use of a Disc (which I wanna note has the name of an existing part AKA the Infinite Ring), it should be a single Chassis so either 1S, 1D, or 4A. And what is it's spin direction? Does it have any gimmicks in the Ring/Chip?
Try to find the answers to these questions and that'll help you better your Bey.
Didn't mean to make this post
(Jul. 03, 2021 7:05 PM)MasterBlader77 Wrote: [ -> ] (Jul. 02, 2021 11:19 AM)PinkRose Wrote: [ -> ]Has a bit too little details. Since this is a Sparking Bey, what Chassis does it use? Given your use of a Disc (which I wanna note has the name of an existing part AKA the Infinite Ring), it should be a single Chassis so either 1S, 1D, or 4A. And what is it's spin direction? Does it have any gimmicks in the Ring/Chip?
Try to find the answers to these questions and that'll help you better your Bey.
ok chassis would be griffin and ring would be scythe, change the name of the disc to chain, would that work? 4A, left spin, rubber and remember the accelerate gimmick on the driver
Better?
(Jul. 03, 2021 7:05 PM)MasterBlader77 Wrote: [ -> ]ok chip would be griffin and ring would be scythe, change the name of the disc to chain, would that work? chassis would be custom, flame 4A, left spin, rubber and remember the accelerate gimmick on the driver
Better?
my first beyblade that i made
Owner: Destiney (i dont remember the last name, it was a long time ago)
Beyblade: Infinity Drako
Layer: Infinity Drako - I remember modeling it, it the layer had a white motif with fire details surrounding the interior of the layer. It had a red two headed dragon going in the middle of it. It also had 6 blades, 4 vertical and 2 horizontal that would deal massive damage.
(i dont recall making a forge disc and driver, pls forgive i wasn't really into beyblade as much as i am today and at the time i was so young turbo wasn't even out yet)
Moves:
Super Drako Crush: Using it's 4 blades, it would ram into the opponent with such force, causing the opponent to either burst or get knocked back a little (if it has good defense)
(Jul. 03, 2021 7:05 PM)MasterBlader77 Wrote: [ -> ] (Jul. 02, 2021 11:19 AM)PinkRose Wrote: [ -> ]Has a bit too little details. Since this is a Sparking Bey, what Chassis does it use? Given your use of a Disc (which I wanna note has the name of an existing part AKA the Infinite Ring), it should be a single Chassis so either 1S, 1D, or 4A. And what is it's spin direction? Does it have any gimmicks in the Ring/Chip?
Try to find the answers to these questions and that'll help you better your Bey.
ok chip would be griffin and ring would be scythe, change the name of the disc to chain, would that work? custom chassis flame 4A, left spin, rubber and remember the accelerate gimmick on the driver
Better?
(Jul. 03, 2021 7:05 PM)MasterBlader77 Wrote: [ -> ]ok chip would be griffin and ring would be scythe, change the name of the disc to chain, would that work? custom chassis flame 4A, left spin, rubber and remember the accelerate gimmick on the driver
Better?
So basically your combo is Scythe Griffin Chain Accelerate 4A? Hmm, that sounds ok I guess.
(Jul. 03, 2021 7:51 PM)PinkRose Wrote: [ -> ] (Jul. 03, 2021 7:05 PM)MasterBlader77 Wrote: [ -> ]ok chip would be griffin and ring would be scythe, change the name of the disc to chain, would that work? custom chassis flame 4A, left spin, rubber and remember the accelerate gimmick on the driver
Better?
So basically your combo is Scythe Griffin Chain Accelerate 4A? Hmm, that sounds ok I guess.
yeah, can i change 4a to a custom name? if I can then flame
(Jul. 03, 2021 7:58 PM)MasterBlader77 Wrote: [ -> ] (Jul. 03, 2021 7:51 PM)PinkRose Wrote: [ -> ]So basically your combo is Scythe Griffin Chain Accelerate 4A? Hmm, that sounds ok I guess.
yeah, can i change 4a to a custom name? if I can then flame
Technically you can't (all Chassis are named in a number+their type like 4A/4-Attack and 1S/1-Stamina), but you can always make your version of 4A have a fiery color scheme.
(Jul. 03, 2021 8:13 PM)PinkRose Wrote: [ -> ] (Jul. 03, 2021 7:58 PM)MasterBlader77 Wrote: [ -> ]yeah, can i change 4a to a custom name? if I can then flame
Technically you can't (all Chassis are named in a number+their type like 4A/4-Attack and 1S/1-Stamina), but you can always make your version of 4A have a fiery color scheme.
right, thanks
My Single Layer Beyblade
Âres Çurve Fusion.
Also Known As: Â.Ç.F
Type: Balance
Spin Direction: Right
System: Burst System
Series: Beyblade Burst
Layer: Âres
- features a four bladed design with two blades slightly angled to make upper attacks possible while the other two are rounded making the layer have more defense power and thus improving stamina. With its power being divided into three types, Attack, Stamina and Defence, it is a true and good xample for a balance type.
Disc: Çurve
- a circular-shaped disc that curves downward with two bumps in the inside as a slot on where the driver attaches and has holes built on its structure for increased stamina and OWD. Its smooth surface increases the Beyblades LAD when it makes contact with the stadium floor.
Driver: Fusion
- features a plastic flat tip with a small diameter and a small protrusion in the center and sits at the standard height. When launched parallel to the stadium, Fusion will spin on the protrusion, creating a stable, Stamina-conserving spin. When knocked off balance by the opponent or launched at an angle, the flat tip will contact the stadium floor and create a movement pattern before returning to balancing on the protrusion.
Next evolution is Âdverse Âres Sphere Zephyr AKA Â2.Sp.Z
Minoboros LIne:
Minoboros Oval Quake
Mad MInoboros Quarter Quake
Wilder Minoboros 12Vortex Accel
Unstable MInoboros Zenith Quake'
Crazed Minoboros Blitz High Accel Go
Derange Minoboros Blitz High Accel' 4A
Kerbeus Line:
Kerbeus Central Defence
Kaiser Kerbeus Limited Press
Guardian Kerbeus 8 Guard
Hazard Kerbeus 8Bump Guard
Shield Kerbeus Sting Yard Ten
Omen Kerbeus Wheel Just 1D
Xcalibur Line:
Xcalibur Force Xtreme
Xeno Xcalibur Magnum Impact
Sieg Xcalibur 1Hit Iron
Buster Xcalibur 1'Dagger Sword
Prime Xcalibur 1'Dagger Ultimate Reboot Go
Supreme Xcalibur 5A Ultimate Reboot'
Zeus Line
Zeus Ring Massive
Zillion Zeus Infinity Weight
Galaxy Zeus 4Meteor Planet
Limitless Zeus 7Bump Solar
Universe Zeus 0Proof Space Goku
Cosmic Zeus Around Satellite 1S
Phoenix Line:
Phoenix Ring Defense
Paradox Phoenix Spread Yielding
Creation Phoenix 7Cross Orbit
Revive Phoenix 10 Friction
Dead Phoenix 0 Atomic
Perfect Phoenix 0Proof Orbit Metal
Hades Line:
Hades Armed Accel
Haggard Hades Vertical Accel
Fallen Hades 1 Zephyr
Dead Hades 11Turn Zephyr'
Slain Hades 1'Lift High Zephyr Retsu
Murderous Hades High Zephyr' 1A
Apocalypse is a dark version of Xcalibur so almost the same combos
Trident Line:
Trident Heavy Claw
Tide Trident 8Meteor Edge
Screw Trident 8Bump Wedge
skip Cho-Z
Riptide Trident Sting Low
Flood Trident Eternal Metal 2S (eternal metal > low)
My first custom DB Bey:
Hazbin Angel Dust Halo-666
Core - Angel (Ag)
A Right Spin Core depicting a biblically accurate Angel. The Core is trans-glittery white while the Angel motif is opaque white with red eyes. It has the same teeth as Belial.
Blade - Hazbin (Hz)
A Right Spin Blade that is identical to the Devil Blade, except the little blades in between the 3 wings are made of rubber. The Blade itself is white with magenta stickers while the rubber is trans-magenta.
Disk - Dust (Du)
Dust is a DB-compatible Disk that has a similar shape to Wheel, except it's completely round (a perfect circle). It is pretty thick, being only slightly thicker than Giga, and weighing just as much. On the surface area of the Disk, there is a pentagram shape carved into it. It is silver in colour.
Driver - Halo (Hl)
's custom Halo Driver. The Driver is trans-glittery magenta and the very tip of it is white.
Armour - 666
666 is an Armour piece resembling a pentagram, having 5 points of weight distribution. There are 4 metallic red stickers on 4 of the star points, with the last one (the bottom point) having a gold sticker. The Armour itself is silver and weighs just a little bit under the 0 Armour.
Owner - Angel Seinaru
I plan to make this Bey a reality one day.
Updated version of my Single Layer Beyblade; Âres Çurve Fusion also known as: Â.Ç.F
Type: Balance
Spin Direction: Right
System: Burst System
Series: Beyblade Burst
Layer: Âres
- features a four bladed design with two blades slightly angled to make upper attacks possible while the other two are rounded like shields making the layer have more defense power and thus improving stamina. The inner plastic area is exposed below the two blades that make upper attack possible. On the rounded part of the layer, the inner plastic is more focused to the center providing more stability and balance.
Disc: Çurve
- a circular-shaped disc that curves downward with build in holes on its structure for increased stamina and OWD. Its smooth surface increases the Beyblades LAD when it makes contact with the stadium floor.
Driver: Fusion
- features a plastic flat tip with a small diameter and a small protrusion in the center and sits at the standard height. When launched parallel to the stadium, Fusion will spin on the protrusion, creating a stable, Stamina-conserving spin. When knocked off balance by the opponent or launched at an angle, the flat tip will contact the stadium floor and create a movement pattern before returning to balancing on the protrusion.
Name for the Dual Layer upgrade of my Beyblade is Âdverse Âres Sphere Zephyr or Â2.Sp.Z for short
New DB Lucifer idea: Jinx Lucifer.Tapered.Bane-6
Lucifer Core (LC): A Right Spin DB Core with a Lucifer Motif, a fallen angel. Has the same rubber stopper as Lucifer2 from Sparking and has 5 teeth of medium height
Jinx Blade (J): a DB Blade that has the similar shape to the Variant Sparking Ring but less recoiled. Has rubber on the underside that sticks out slightly for extra Defense (in theory..)
6 Armor
Tapered Disk (Tp)
Bane Driver (Bn): a Driver that is about Mobius height. The driver has a shaft with a sharp tip with a free spin POM ring surrounding the shaft which in theory should grant immense KO Resistance and LAD.
User: Lain Valhalla
Moves: Jinx Wall, Jinx Press, Jinx Disaster, Bane Counter
Gonna do Achilles and Dragon next
So it's has a mix of Variant and The End's abilities? Neat.
(If we actually somehow get a new Lucifer or something similar to it I really hope its Driver doesn't break the meta like Drift, haha..)
Did I already use this prefix for a fanfic? Yes. Is that going to stop me from using it again? Not this time, I legit can't find anything else that fits. I've been thinking about making a Belial downgrade for a while now, and I'm doing it with my former favorite Layer system...Sparking!
Full Combo: Detonate Belial αnchor' 6A
System: Sparking Layer System
Sub-system: None
Spin Direction: Right
Bey Type: Attack
Bey Parts & Details:
Sparking Chip - Belial: Belial is a horizontal Right-spinning Sparking Chip featuring a demonic face to represent its namesake; Belial, the devil in Jewish and Christian texts. The Chip's base color is black with golden highlights, and a pair of blue eyes.
Ring - Detonate: Detonate is a Right-spinning Ring featuring three jagged blades as the main contact points, with some spaces between them. Its jagged triangular shape and large contact points give it fairly good Attack potential, and synergizes with the 6A Chassis as said Chassis' blades fill in the gaps between the blades to a certain extent. The Ring is mainly black, with white highlights that are mainly present along the contact points.
Chassis - 6A: 6A, or 6-Attack, is a dual-spinning Double Chassis featuring six blades that act as some sort of contact points, except that the chassis is entirely made of rubber and therefore can, at lower speed, Spin-Equalize with a right-spinning opponent of higher speed, but that has a rather small chance of actually occuring when the 6A combination is using a high-speed Driver. The Chassis' color is primarily dark red.
Driver - αnchor': αnchor' is an Attack-type Driver with a flat plastic tip surrounded by a spiky rubber ring, that sits above the standard height. The rubber makes for an aggressive design that, theoretically, works like Unite and Merge, where the rubber gives a boost of speed when it makes contact with the stadium. Like other Dash Drivers, αnchor' features a red spring lock and tighter spring lock, which enhances its Burst Resistance. The Driver is an opaque black color, and the rubber is white.
No special moves, it's just a Bey idea. I'm not exactly sure about αnchor's description because I haven't seen it in action and most certainly don't have it, and all of the above is just deduction from its looks. And yes, I retconned 6A so it's now dual spin instead of just Left. Opinions?