World Beyblade Organization by Fighting Spirits Inc.

Full Version: Create your own Beyblade Burst!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
Blue Eyes White Dragon
Layer:Blue Eyes
Disk:White
DriverGrinragon
Luminant Gemina Twin San
LG.Tw三
Layer Chip: Gemina depicts two twins. One tall tooth and a rubber slope. right spin
Layer Weight: San. Has the middle hexagons and one hexagon on the leading edge in right spin the bar sweeps back but doesn't connect back to the center like retsu would.
Layer Base: Luminant. Has two hammer-like contact points weighted by metal.
Disk/Driver: Twin. A large top like driver with a survive shaped tip and heavy metal in the outer ring. Has two sweeping contact points that turn on a track with two "Clicks." When the contact points reach the end of the track the mechanism releases and the Layer pops off with an assault sized slightly rounded flat tip.
Destroy Armageddon

Base: Destroy - Features 4 blades with metal in them to deal heavier attacks (Similar to Zwei Longinus)

Weight: Hietsu - has the similar shape of Goku but its 3X heavier (14

GT Chip: Armageddon - Depicts a demon-like serpent with green eyes with Teeth of EXTREMELY tall height

Disk: 00

Frame: Bump

Driver: Catalyst' - is kinda like power where the Spring is connected to the lock spring, the tip is also made of metal
Urgent Ursa

Energy Layer: Urgent Ursa
Urgent Ursa is a left spin dual layer attack type. There are blades that look like Achilles’ top and bottom blades but in left spin. To the left and right are Spears. They are shaped similar to a Xcalibur sword tip, but instead of a sword, they are spears. The spear had two heads. The bit beast is a armored bear that is getting ready to grab its spear by the teeth. In between the blades and the spears are Ursa’s golden claws.

Forge Disk: Oval

Driver: Assault

Special Moves:

Dual Spear: When Urgent Ursa reaches two clicks, the oval forge disk synergies with the spears, giving Ursa a significant boost in attack. It hits it opponent twice to burst it. The first hit stuns the opponent. The second one bursts the opponent.

[Image: 3fr5ym.jpg]
Knight Dragon Image
it has rubber like spriggan and a zwei longinus like uppers, it have metal only on the black balls
[Image: vFfFKGH.png]
Eletric Driver Lighting Boost' just like hybrid, but with a RF
(Jul. 08, 2015  3:06 PM)Siⱺn Wrote: [ -> ]This is for post-contest ideas for beyblade burst. Feel free to share your ideas here Smile


Format:

Layer (Saber Leon): To big "fangs" sticking out with metal on them with surrounding plastic around them and a little piece of rubber between them that moves out words to make contact. It has dark green plastic that the "fangs" connect to that looks like a lion's face.


Disk (1'): Came out on Buster Xcalibur, it is a uneven disk with one pointed spot facing out.


Driver (Impact): Came out on Xeno Xcalibur, it has a mix of rubber and plastic so it can move around the stadium very fast.
Here's one Neon Nitro balanc type

Layer looks like z achilles but when you hit it in defense mode a spring in the swords push you back hard making you burst in attack mode the springs are locked and it spins fast and like Phoenix that armor comes off and rubber makes it steal spin on and it is blue and white.

Disk can push back up when hit onto the ground and dose a flip in the air hitting the aponemt hard making him burst.

Tip can be made long or short long makes it an attack type and short makes it go defense .
I've got a slight idea for a bey
The layer would be a dual spin balance type called Eclipse Drageill (Ed), it's a Cho-z layer. The layer looks slightly like Venom Diabolos, as there are four wings for attack and defense, but it's colored white and black. The emblem is a red jewel that fades to blue, surrounded by four large metal claws. The back of the wings have some metal on them as well. Two of the wings have more metal than the other two. The layer itself can also change into three different modes by rotating the wings. The modes are Upper mode, Barrage mode, and Counter mode.

The disk would be 0, which was released on Spriggan Requiem, and is still a pretty heavy disk to this day. The frame is "Fang," (F)which is a silver frame that adds more weight to the two heavy wings on the layer, but also has slight balance.

The driver would be called Corrupt' (Cr'). It's a performance tip that can alternate between attack and defense, and can slightly change the height of the bey, like Extend. Attack mode would be a whole flat, and is the highest mode, while defense would be a ball tip, and is the lowest. The driver is black.

Drageill also has a purple level chip.
The avatar is a white and black dragon with one red, one blue eye, that can control fire and ice.
This is a bey I actually want to design.
Lock Gwazi. Roll. Repel
LG.Rl.Rp
Layer base: Lock. Balance type base with two contact points that can compress inwards to press in a large rubber burst guard.
GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.
Disk: Roll. Heavy metal disk with Three large rollers.
Driver: Repel. A Low angle cone that is on repelling magnets to absorb bounce without the stamina drain of Nothing.
(Nov. 14, 2019  7:32 PM)MWF Wrote: [ -> ]Lock Gwazi. Roll. Repel
LG.Rl.Rp
Layer base: Lock. Balance type base with two contact points that can compress inwards to press in a large rubber burst guard.
GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.
Disk: Roll. Heavy metal disk with Three large rollers.
Driver: Repel. A Low angle cone that is on repelling magnets to absorb bounce without the stamina drain of Nothing.

What about the weight?
(Nov. 14, 2019  7:46 PM)BuilderROB Wrote: [ -> ]
(Nov. 14, 2019  7:32 PM)MWF Wrote: [ -> ]Lock Gwazi. Roll. Repel
LG.Rl.Rp
Layer base: Lock. Balance type base with two contact points that can compress inwards to press in a large rubber burst guard.
GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.
Disk: Roll. Heavy metal disk with Three large rollers.
Driver: Repel. A Low angle cone that is on repelling magnets to absorb bounce without the stamina drain of Nothing.

What about the weight?

Gwazi has a fused weight. It is like diabolos but it doesn't contact back.
(Nov. 14, 2019  9:06 PM)MWF Wrote: [ -> ]
(Nov. 14, 2019  7:46 PM)BuilderROB Wrote: [ -> ]What about the weight?

Gwazi has a fused weight. It is like diabolos but it doesn't contact back.

Shoulda made that clear.
Update! It's about time Kagutsuchi got one.

Flaming Kagutsuchi, Shift, Dual metal, Goku

Layer base: Flaming is a right spin balance type base with adjustable blades (like the union swords on union Achilles). These adjustable blades can rotate on a metal center ring to either align with the four blades on the main base for attack mode, or close the gaps a bit for defense mode. The main base has onset metal in the blades, but underneath where you would put the adjustable blades for heavy weight on the contact points. The base would be black with chrome red highlights here and there. The adjustable blades would be chrome red.
Gt chip: Kagutsuchi would basically be Ashura with diabolos sized teeth. The chip would depict Kagutsuchi on the bottom, and swirling red flames on the top. There would be flaming claws grasping the center where the weight would show through. The main color would be black.
Disk: Shift would basically be hell salamander as a right spin on a disk.
Driver: Dual+ would be black, and would have a mode change like zeta, but would have two modes. A metal survive for stamina, and a metal accel for attack.
Final naming: FK,Sh,DlM,Goku
Storm Drago
(Nov. 15, 2019  12:24 AM)Stamina drainer Wrote: [ -> ]Storm Drago

Is that a beyblade you made? Or a custom combo?
(Nov. 14, 2019  9:15 PM)BuilderROB Wrote: [ -> ]
(Nov. 14, 2019  9:06 PM)MWF Wrote: [ -> ]Gwazi has a fused weight. It is like diabolos but it doesn't contact back.

Shoulda made that clear.

GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.
(Nov. 15, 2019  2:08 AM)MWF Wrote: [ -> ]
(Nov. 14, 2019  9:15 PM)BuilderROB Wrote: [ -> ]Shoulda made that clear.

GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.

I see. You probably should have said the weight is fused to the GT chip but whatever.
(Nov. 15, 2019  2:12 AM)BuilderROB Wrote: [ -> ]
(Nov. 15, 2019  2:08 AM)MWF Wrote: [ -> ]GT chip: Gwazi. Depicts two Alligators. Has two sweeping metal weights. Has six teeth. Three sets of offset teeth.

I see. You probably should have said the weight is fused to the GT chip but whatever.

Though it should be obvious enough. If it doesn't have a weight stated then it is common sense that either the base is not compatible with weights or that it is fused with the GT Chip.

Though you aren't very descriptive yourself.
Superstar Ursa 0 Hold
Superstar Ursa: A left spin attack type that is a God bey. It has two wings, one on the top, and one on the bottom. To the sides of the beyblade there are spear heads, larger than that on Urgent Ursa. They are entirely gold colored as well as the spear handle with the center of the spear head having a smaller spear head made of metal. In between the wings and the spear heads are bear claws. The bear hands are orange while the claws, now the same direction as the wings, are gold. In the middle is the God Chip. It has a U the same style as Urgent Ursa’s. The God Chip is orange. Also in the middle is the bit beast: Ursa. It is a side view to the left side of Ursa. It shows Ursa’s head with six teeth that are sharp and it also shows half of the bear nose. Also shown is the eye which is yellow as well as an ear. Above the eye is the horn from the armor Ursa is wearing.

0: You guys already know about this one.

Hold: you guys also know about this one.

[Image: 3gl5k0.jpg]
Refractory IrisII.Retaliate (Rei)
RfIr.Rt(例)
Layer base: Refractory. A two sided defense layer with metal weighting the outside of the layer. Cannot be used with a weight with a middle hexagon nor any chip with a built in weight. Using a weight forces two Kulkulkan style contact points out to fill in gaps. Not using a weight allows the contact points to move inwards and will do so later in the battle.
Layer Weight: Rei, Has no hexagons and fills the center except for where the middle hexagon would be.
GT chip: IrisII. Depicts a crystal with four good teeth.
Disk/Driver: Retaliate. A shape similar to Xt+ in defense mode that will spin up on a motor after the second click.
Layer base: Crush
Blue,white, and gold
Similar to slash, but it has more of a rounder shape, making it more competively viable
About the size of knockout
Btw picture a left spin version of slash

Layer weight: Goku
Heaviest weight available
Useful, because of Crush's size

Gatinko chip: Leviathan
A left spin Gatinko chip
Teeth are about the same if not slightly better than fafnir's
Portrays a picture of levitation, a creature of water.

Disk, 7
A good disk for stamina, and fairly heavy

Frame: grip
The first rubber frame
Designed to make the bet speed up in battle, however the gimmick does not work as intended, and instead makes the opponent burst more easily in disk to layer contact.

Tip: Quick'
The same driver that came with storm Pegasus
Very good for attack combos, as it maintains a good banking pattern.
Layer: Dagger Phoenix. Jagged and smooth style, four dragons surrounding it, and an outer layer similar to revive or dead Phoenix. Also it is purple, silver, and black.

Disk: Fort. Octagonal shape with rugged edges, silver, and be decently heavy.

Driver: Ultimate Volcanic. Volcanic but purple, slightly more freely spinning, and more springy.
Acht Orochi 3'Bump Destroy' Goku

Acht is a Layer base with 8 small blades, almost overlayed over each other over the ends. They slope downwards in the right-spin direction, leading to more destabilization. They spike at the ends, leading to increased Spike Attack and less blunt contact points.

Orochi is a Layer Base depicting the Japanese 8-Headed mythical creature Orochi. There are 3 large teeth on both sides, not on the level of Valkyrie, but more akin to a less burstable Ashura.

3' is much like 3, but rather than an internal focused weight, there are 4 threes on the outside of the ring, symmetrically, which makes it look a little like 2, but it focuses on an outer weight distribution.
(Nov. 16, 2019  10:52 PM)BuilderROB Wrote: [ -> ]Superstar Ursa 0 Hold
Superstar Ursa: A left spin attack type that is a God bey. It has two wings, one on the top, and one on the bottom. To the sides of the beyblade there are spear heads, larger than that on Urgent Ursa. They are entirely gold colored as well as the spear handle with the center of the spear head having a smaller spear head made of metal. In between the wings and the spear heads are bear claws. The bear hands are orange while the claws, now the same direction as the wings, are gold. In the middle is the God Chip. It has a U the same style as Urgent Ursa’s. The God Chip is orange. Also in the middle is the bit beast: Ursa. It is a side view to the left side of Ursa. It shows Ursa’s head with six teeth that are sharp and it also shows half of the bear nose. Also shown is the eye which is yellow as well as an ear. Above the eye is the horn from the armor Ursa is wearing.

0: You guys already know about this one.

Hold: you guys also know about this one.

[Image: 3gl5k0.jpg]
looks cool
(Nov. 18, 2019  3:46 PM)veltrek Wrote: [ -> ]
(Nov. 16, 2019  10:52 PM)BuilderROB Wrote: [ -> ]Superstar Ursa 0 Hold
Superstar Ursa: A left spin attack type that is a God bey. It has two wings, one on the top, and one on the bottom. To the sides of the beyblade there are spear heads, larger than that on Urgent Ursa. They are entirely gold colored as well as the spear handle with the center of the spear head having a smaller spear head made of metal. In between the wings and the spear heads are bear claws. The bear hands are orange while the claws, now the same direction as the wings, are gold. In the middle is the God Chip. It has a U the same style as Urgent Ursa’s. The God Chip is orange. Also in the middle is the bit beast: Ursa. It is a side view to the left side of Ursa. It shows Ursa’s head with six teeth that are sharp and it also shows half of the bear nose. Also shown is the eye which is yellow as well as an ear. Above the eye is the horn from the armor Ursa is wearing.

0: You guys already know about this one.

Hold: you guys also know about this one.

[Image: 3gl5k0.jpg]
looks cool

Thank you!
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33