This is one of my old time favourite due to its cute design..haha..
Worked on this article for quite a long time..so finally finished it..hope it is OK.. XD
Quote:{{Beybox
| image = dranzer_auto_change_balancer.jpg
| full item name = Dranzer Auto Change Balancer
| item number = #27
| beyblade system = [[4 Layer]]
| beyblade type = [[Balance]]
| starter or booster = [[Starter]]
}}
__TOC__
==Attack Ring : Wing Cutter==
[[Wing Cutter]] is a thin but well balanced AR, designed in circular shaped with four wings. Each wings are designed with a Smash Attack Point for [[Smash Attack]] purposes. Even though this AR is made for [[Smash Attack]], [[Wing Cutter]] however is not able to deliver enough force to perform deadly attacks and is also suffering from high [[Recoil]].
Moreover, being as an AR with small radius, this AR is only usable with 6-Balance and 6-Heavy only, making it completely useless competitively and had been hard to be use in 5-Layer System (or later system released in plastics generation). Despite of its small radius, [[Wing Cutter]]can be used in [[WD Attack]] customization even though WD Attack Customization is not among the best attack customization.
[[Wing Cutter]] is also known for being a fragile AR since it is very easy to break due to its thin and spiky design. [[Wing Cutter]] was getting more diminished with the release of 5 Layer System (and the later system) and unfortunately became a very outclassed part.
===Mold Variation===
Hasbro also released [[Dranzer Auto Change Balancer]] as [[Auto Change Blancer]] without any difference on their respective parts except on their [[Attack Ring]]. Hasbro’s [[Wing Cutter]] is highly reinforced at the wing part (at the smash attack point) making it more durable and less fragile.
== Weight Disk (WD): Balance ==
See [[Wide Weight Disks | Balance]].
== Blade Base (BB): Auto Change Base==
[[Auto Change Base]] is the first [[Blade Base]] that can have two modes that is Attack Mode and Stamina Mode which is then followed by most of the [[Dranzer]] series. The multiple change of mode is then become the signature of the early [[Dranzer]] from the first season up to V-Force season.
Despite of its name, [[Auto Change Base]] is a [[Blade Base]] that can change from [[Attack]] mode into [[Stamina]] mode when it is hit. While it is in Attack mode, the [[Blade Base]] sharp tip will be retracted into the Blade Base leaving the flat surface as its tip(similarly XF tip in MFB). [[Auto Change Base]] in Attack Mode give it the aggressive and fast movement for Attack purposes. However, this Attack Mode is incredibly hard to control due to its light weight causing it to Self K.O. easily.
While in Stamina Mode, the sharp tip will be extracted from the Blade Base, giving it some decent [[Survival]]. Due to the perfect circular designed of this Blade Base,[[Auto Change Base]] has decent [[Life After Death]] making it suitable for first generation Zombies and Stamina customization when it is in Stamina Mode(Stamina Mode can be set to be permanent).
== Gallery ==
<gallery>
</gallery>
== Overall ==
Apart from having interesting gimmick, Dranzer ACB does not serve any competitive purpose plus that it also has some breakage issue. However, this Beyblade from the very first generation can be bought for collection purpose as it has some aesthetic value.
[[Category
lastic Beyblade]]
[[Category:Beyblade]]
any correction is very apreciated..
Since there isn't any difference between the hasbro and takara ones the hasbro one isn't considered another version.
The AR? Hasbro's AR mold is very different...thats what makes me put it in the other version..
also..i'm not so sure that Wing Cutter is usable for WD Attack customization..i dont know if Wide Defence is well exposed since i dont have it..can anyone check it for me..
That doesn't make it another version. Bistool, Gekiryu-oh and ultimate frostic dranzer have different molds for the hasbro and takara but that doesn't make it another version. Another version typically is a recolour.
Ok..got it..
i will remove the "Other Version" section..
thanks..
Good job. I don't see an issues, currently. Nice job on the article!
This article is near perfect but i've got a few things to say. Also i'm pretty sure that the two molds probably perform quite differently. They're very different so how couldn't they be. Also maybe a combo for the base? Oh and I know for certain that there is a red recolour of this not that anyone is likely to find it these days.
I think you should add the fact that the Hasbro's Mold has not the same propreties of the Takara Ver. It's because the reinforcements cover the wings, the main parts that produce smash ; also, it decreases the space that should exist to have an efficient attack, nullifying its Smash.
He already did. It's noted in the mold variation section. I already told him to talk more about the hasbro mold due to the those reasons of the usage being taken away.
Do you mean:
===Mold Variation===
Hasbro also released [[Dranzer Auto Change Balancer]] as [[Auto Change Blancer]] without any difference on their respective parts except on their [[Attack Ring]]. Hasbro’s [[Wing Cutter]] is highly reinforced at the wing part (at the smash attack point) making it more durable and less fragile.
?
I've already read it, but I don't see anything that seems the things I said xD
Um that's I asked him to talk about it. I had already realised it doesn't say any of those things. I would do it myself but I don't have the AR.
Also, I don't see a "SG" section...
There is no SG it is a 4 Layer beyblade.
(Jul. 10, 2012 10:53 PM)Dingodigo Wrote: [ -> ]There is no SG it is a 4 Layer beyblade.
Ah, I see...
Did not realize that.
Yeah, future tip: If you don't know anything at all about a beyblade, don't post in the draft thread.
Saves you embarrassment, saves everyone else time.
(Jul. 10, 2012 6:11 PM)Galaxy Wrote: [ -> ]I think you should add the fact that the Hasbro's Mold has not the same propreties of the Takara Ver. It's because the reinforcements cover the wings, the main parts that produce smash ; also, it decreases the space that should exist to have an efficient attack, nullifying its Smash.
so..you mean that hasbro's mold is a lot worse than takara's mold since the gap is smaller?
i dont have the hasbro mold..hahah XD so..i wont know much..
sorry guys...it would take me sometime to edit any changes in any of my drafts since i dont online quite frequent except on weekends..
Well someone needs to test the hasbro one then. If you look at the two of the them they're very different. I might try and get a hasbro Dranzer ACB now that you've said that.
I was looking at my Hasbro Auto Change Balancer and noticed that the blade base looks a little different from the Takara version. There are three strips of plastic connected to the tip and the lower part of the blade base. If anyone wants to see pictures of it I can provide some latter.
Yeah, take a picture, though that doesn't sound different from the takara version to me...
: It's not like ACB's AR has much smash anyway, barely any range, poorly shaped contact points (seeing as it's right spin only), and ridiculous fragility.
I will be able to take pictures of it at the end of the week because I am currently on vacation. It may be a reinforced mold or something similar to that and if you guys want to see the other mold OkinawamTS has a picture of one in his selling thread.
i once had the Hasbro's version ACB's BB...it was in bad shape...but the only thing i noticed is the SG part is quite different while the rest seems to look the same..
but it was in bad shape...
http://s1212.photobucket.com/albums/cc45...0Balancer/
OK I have uploaded the pictures now I have also uploaded a picture of the SG. When I tried to test this thing in my BB 10 the results were pretty bad the base was scraping against the the extra plastic reinforcements. But I do not have a wide defense or survivor but I bet even those weight disks could not even give this thing any extra LAD.
(Jul. 16, 2012 7:20 PM)Kenshin Wrote: [ -> ]http://s1212.photobucket.com/albums/cc45...0Balancer/
OK I have uploaded the pictures now I have also uploaded a picture of the SG. When I tried to test this thing in my BB 10 the results were pretty bad the base was scraping against the the extra plastic reinforcements. But I do not have a wide defense or survivor but I bet even those weight disks could not even give this thing any extra LAD.
Oh, so that's what the Auto Change Base looks like. Interesting!
That's what the hasbro one looks like, the takara one looks very different (and I'm thinking the takara version would have way better LAD).
Thanks Kenshin!
There's a pic on this page:
http://homepage3.nifty.com/hind/sub10-1.htm
The only thing that different is that the aren't attached to the bit where the tip comes out of for the Takara one which does probably make it have better LAD.